What should be paid attention to when operating the elastomer pouring machine safely? In the operating 弹性体浇注机 Before must first understand the elastomer pouring machine operating instructions and procedures.

When the elastomer pouring machine core-down, wait until the completion of the process in the mold, especially before the hand did not leave, can not close the mold frame, to prevent accidental hand injury, resulting in dangerous accidents. Elastomer pouring machine in the operation is generally equipped with two people to operate, polyurethane elastomer pouring machine energy, can not drift, to cooperate with each other, cooperate with each other.

After the completion of each casting, the two shall divide the labor and cooperate to pile up the good castings of the master in a neat manner, which shall not be put in disorder. The height of the castings shall be within the safe height, and the sidewalks shall be kept well, so as not to hinder the traffic. In the process of the core, there will certainly be a chip problem, such as a lot of core head, core plate is damaged, closed mold is not strict, then do not panic, do not start pouring. Wait until all the problems are solved before pouring.

Elastomer pouring machine in use is in accordance with a certain proportion of the situation to batching. It prepares the sealing material during operation. Most of them inject slurry according to a certain proportion, such as lime powder, cement, quicklime, gypsum, etc. After adding water, manual stirring is carried out to make it fully mixed until the reaction of fusion is generated. Do not leave the polyurethane elastomer pouring machine for too long time, it should be timely injected into the mold frame that needs to be sealed.