Hydraulic steering wheel die frameComposed of three parts, steel structure welding molding, hydraulic drive part,PLC automatic control part. Each die frame is an independent control system, separate PLC control, the bottom of the die frame is installed with four casters, easy to move. The mould frame has the sway function, that is, after the mould is injected with foaming material, the equipment will automatically
rock, to improve the flow of foaming material in the mold, and at the same time to let the foaming materialMaterial A and material B are mixed twice in the mold to ensure the qualified rate and quality of the product, the swing Angle and the swing time. Users can set and adjust according to the production process requirements. Equipment installation timer, raw materials into the mold, start the timing, after the completion of curing, mold automatically opened.
Hydraulic steering wheel die frametechnical parameters：
Hydraulic foam die holder： |
Template Size（L*B） | 740mm *760 mm |
Height of lower formwork surface off the ground | 780mm |
Maximum closing height | 500mm |
Mould Angle | ≤85° |
angle of inclination | 0～15°(adjustable) |
clamping force | 12000kgf |
hydraulic pressure station： |
hydraulic motor | 7.5kw |
System operating pressure | 12MPa |
Hydraulic station oil temperature | ≤65℃ |
control voltage | 24V |
System test pressure | 16Mpa |
power source | 380V 50Hz Three-phase five line |
